I have a Phantom 2 vision plus and I have had since purchasing it new when the came out. I have not flown it in over a year and now I have pulled it out and I am not getting any wireless signal from the range extender. I have charged everything up, have upgraded the software and firmware all to the latest versions. I have gone thru the rebinding steps for binding range extender to the camera terry. one you are right (QR Code) is the solution. first turn on your remote control then repeater then plane along with the camera to WI Fi on (STEPS AS ONE BY ONE). after this go to your phone dji vision app CONNECT THE WI FI TO YOUR PHONE (some times your phone if couldn't connect to the phantom just turn OFF other network connections to Print this on your bird for future rebinding. Then do the manual bind as per link below. Make sure you press the done button. And keep retrying as it may not work first time. Phantom 2 Vision-Preparing the Range Extender - DJI Wiki. If all else fails then you may have a loose cable or dead wifi module. 1. turn on vision+, extender, smartphone, dji vision app, see blank live video screen. 2. using notebook/pc connect to Wi-Fi network "Phantom_xxxxx". 3. Right click on start and select command prompt (windows 8) 4. ping 192.168.1.2 If ping successful, your wifi-extender is alive and can connect to Phantom's Wi-Fi (binding is ok). If your camera isn't responding to the control wheel, check the gimbal advanced settings. Look for "Gimbal Pitch Smooth (0-30)" under each configuration. If it's set to 30 or near 30, the wheel won't work. Adjust it to around 20, and your wheel should control the gimbal pitch (camera movement up and down). This setting came with the app upgrade Step 1: Connect the Camera to Your Computer. Step 2: Open the Phantom 3 Camera App. Step 3: Select the Mode You Want to Use. Step 4: Click on the Settings Tab. Step 5: Click on Wi-Fi and Connect to the Network. Step 6: Enter the Password and Click on Connect. If you have questions or concerns about using your camera, please contact Dji Customer The DJI Phantom 2 Vision+ with remote controller and DJI Vision-equipped smartphone application. The drone's 5200 mAh lithium ion battery pack. In terms of dimensions, the DJI Phantom 2 Vision+ drone can fit inside a cubic foot sans propellers. The plastic propellers themselves are 9.5 inches, but the unit still does not consume a lot of space Hi. After marshmallow update my Samsung Galaxy S5 Dji Go not work is installed with Litchi and not work Litchi. If you install only Dji Go or only Litchi the system work (phantom 3 pro). I tried your solutions but option "install application" in Usb option developer not exist. Please Help me. Thanks. Paolo 1fyLXfL.

dji phantom 2 camera not working